Product code:

polyfit elbow90

1

Call for price

polyfit elbow90

Description

In this type of connection, you can easily put the pipe inside the connection with complete sealing by loosening the screw and then tighten the corresponding screw. In this type of connections, due to the use of raw materials with UV stabilizer, there is the ability to resist ultraviolet rays (UV) and can be exposed to sunlight in Expose applications.

Product polyfit elbow90

features polyfit elbow90

installation tips

No need to disassemble the connection and install the pipe inside the connection by only opening the first three threads of the connection (mounting as a push fit)
High speed in resolving incidents and maximum prevention of water wastage
Reducing the human error factor when installing connections
Withstanding the hydrostatic pressure test based on the INSO 21264 (ISO 17885) standard and health certification according to the ISIRI 1053 standard.

First, cut the pipe at a 90 degree angle and smooth the cut area well with a file.
Open the connection screw to the size of 3 to 4 gears.
Push the tube into the joint until it reaches the inner edge of the body.
The connection head should be completely closed to the last gear on the body. Use a whip wrench for small size connections.

components

This type of connection consists of the following parts: 1. The main body 2. head turn 3. Split ring 4. bushing 5. Sealing washer

Application polyfit elbow90

The simple polyfit elbow is widely used to change the direction of water in pipes with a 90 degree angle. A polyethylene pipe is connected to both ends of this elbow. This product is also used in drinking water pipelines.