BeladAlmaa > Products > Polyethylene ball valve with two gear heads inside ParsKhavar

Product code:

Polyethylene ball valve with two gear heads inside ParsKhavar

Call for price

Specifications of the Y-type strainer valve product

features

installation tips

Flange dimensions: according to DIN 2501 standard
- Flange to valve flange distance: DIN 3202-F1
- Hydrostatic test pressure: according to DIN EN 12266-1 standard
- Corrosion protection: full coating with blue electrostatic epoxy powder paint (RAL 5005) according to DIN 30677-T2 standard

Install the valve at a suitable distance in the vertical or horizontal direction of the pipe.
Before putting this valve into service, all functional parts of the valve must be checked in terms of appearance.
Make sure all screws are tight.
The pipeline where the valve is installed must be free of any foreign material.
Before starting the valve, fully open and close the valve disc at least once to ensure its operation.

components

- Body and cover: ductile iron (GGG40) - Body and valve sealing ring: stainless steel (X20Cr13) - Mesh: stainless steel (X20Cr13) - Rubber parts: EPDM

Application of Y-type filter valve

Install the valve at a suitable distance in the vertical or horizontal direction of the pipe. Before putting this valve into service, all functional parts of the valve must be checked in terms of appearance. Make sure all screws are tight. The pipeline where the valve is installed must be free of any foreign material. Before starting the valve, fully open and close the valve disc at least once to ensure its operation.