This pump is a horizontal centrifugal type with a spiral chamber and one floor. The pump housing is cut axially, which makes it possible to replace the rotating components easily, and there are replaceable wear rings on the housing. The thrust and suction flanges of the pump are connected to the lower half of the housing, and both flanges are located in a parallel line to the center. (Linear pump). The pump impeller is radial type, closed and has two fluid inlets. In this type of propeller, there will be no axial force. The propeller is statically and dynamically balanced according to ISO 1940. The pump shaft is completely sealed in terms of leakage of the pumped fluid, and the shaft is covered with a protective bush in the place of the seals. The pump bearings have one deep groove bearing on each side, which are coated and will not need relubrication during the life of the bearing.
Water supply pumping stations, drainage, power plants, water supply systems for industrial uses, fire pumps, marine uses and general uses of refineries.
